Quantities, Units, Dimensions and Types (QUDT) SHACL Schema - Version 3.1.10

qudt:AbstractQuantityKind

qudt:AngleUnit

All units relating to specificaiton of angles.

qudt:AspectClass

qudt:BaseDimensionMagnitude

A Dimension expresses a magnitude for a base quantity kind such as mass, length and time.

DEPRECATED - each exponent is expressed as a property. Keep until a validation of this has been done.

A Dimension expresses a magnitude for a base quantiy kind such as mass, length and time.

DEPRECATED - each exponent is expressed as a property. Keep until a validation of this has been done.

qudt:BinaryPrefix

A Binary Prefix is a prefix for multiples of units in data processing, data transmission, and digital information, notably the bit and the byte, to indicate multiplication by a power of 2.

A Binary Prefix is a prefix for multiples of units in data processing, data transmission, and digital information, notably the bit and the byte, to indicate multiplication by a power of 2.

qudt:Citation

Provides a simple way of making citations.

Provides a simple way of making citations.

qudt:Comment

qudt:Concept

The root class for all QUDT concepts.

The root class for all QUDT concepts.

qudt:ConstantValue

Used to specify the values of a constant.

Used to specify the values of a constant.

qudt:ContextualUnit

qudt:CountingUnit

A Counting Unit is used for all units that express counts. Examples are Atomic Number, Number, Number per Year, Percent and Sample per Second.

Used for all units that express counts. Examples are Atomic Number, Number, Number per Year, Percent and Sample per Second.

qudt:CurrencyUnit

Currency Units have their own subclass of unit because: (a) they have additional properties such as 'country' and (b) their URIs do not conform to the same rules as other units.

Used for all units that express currency.

qudt:DataItem

A Data Item holds a value that maybe a scalar or structured datatype. Quantity Value specifies which case applies.

qudt:Datatype

A Datatype is a definition of the type of the "value" of a data item (for example, "all integers between 0 and 10"), and the allowable operations on those values; the meaning of the data; and the way values of that type can be stored. Some types are primitive - built-in to the language, with no visible internal structure. For example "Boolean"; others are composite - constructed from one or more other types (of either kind). For example lists, arrays, structures, unions. Some languages provide strong typing, others allow implicit type conversion and/or explicit type conversion.

qudt:DecimalPrefix

A Decimal Prefix is a prefix for multiples of units that are powers of 10.

A Decimal Prefix is a prefix for multiples of units that are powers of 10.

qudt:DerivedUnit

A Derived Unit is a type specification for units that are derived from other units.

A DerivedUnit is a type specification for units that are derived from other units.

qudt:DimensionlessUnit

A Dimensionless Unit is a quantity for which all the exponents of the factors corresponding to the base quantities in its quantity dimension are zero.

A Dimensionless Unit is a quantity for which all the exponents of the factors corresponding to the base quantities in its quantity dimension are zero.

qudt:Discipline

qudt:EnumeratedValue

An Enumerated Value class defines the members of an enumeration. An enumeration is a set of literals from which a single value is selected. Each literal can have a tag as an integer within a standard encoding appropriate to the range of integer values. Consistency of enumeration types will allow them, and the enumerated values, to be referred to unambiguously either through symbolic name or encoding.

Enumerated values are also controlled vocabularies and as such need to be standardized. Without this consistency enumeration literals can be stated differently and result in data conflicts and misinterpretations.

The tags are a set of positive whole numbers, not necessarily contiguous and having no numerical significance, each corresponding to the associated literal identifier. An order attribute can also be given on the enumeration elements. An enumeration can itself be a member of an enumeration. This allows enumerations to be enumerated in a selection.

Enumerations are also subclasses of Scalar Datatype. This allows them to be used as the reference of a datatype specification.

qudt:Enumeration

An Enumeration is a set of literals from which a single value is selected. Each literal can have a tag as an integer within a standard encoding appropriate to the range of integer values. Consistency of enumeration types will allow them, and the enumerated values, to be referred to unambiguously either through symbolic name or encoding. Enumerated values are also controlled vocabularies and as such need to be standardized. Without this consistency enumeration literals can be stated differently and result in data conflicts and misinterpretations.

The tags are a set of positive whole numbers, not necessarily contiguous and having no numerical significance, each corresponding to the associated literal identifier. An order attribute can also be given on the enumeration elements. An enumeration can itself be a member of an enumeration. This allows enumerations to be enumerated in a selection. Enumerations are also subclasses of Scalar Datatype. This allows them to be used as the reference of a datatype specification.

An enumeration is a set of literals from which a single value is selected. Each literal can have a tag as an integer within a standard encoding appropriate to the range of integer values. Consistency of enumeration types will allow them, and the enumerated values, to be referred to unambiguously either through symbolic name or encoding. Enumerated values are also controlled vocabularies and as such need to be standardized. Without this consistency enumeration literals can be stated differently and result in data conflicts and misinterpretations.

The tags are a set of positive whole numbers, not necessarily contiguous and having no numerical significance, each corresponding to the associated literal identifier. An order attribute can also be given on the enumeration elements. An enumeration can itself be a member of an enumeration. This allows enumerations to be enumerated in a selection. Enumerations are also subclasses of Scalar Datatype. This allows them to be used as the reference of a datatype specification.

qudt:Figure

qudt:IntervalScale

The interval type allows for the degree of difference between items, but not the ratio between them. Examples include temperature with the Celsius scale, which has two defined points (the freezing and boiling point of water at specific conditions) and then separated into 100 intervals, date when measured from an arbitrary epoch (such as AD), percentage such as a percentage return on a stock, location in Cartesian coordinates, and direction measured in degrees from true or magnetic north.

Ratios are not meaningful since 20 °C cannot be said to be "twice as hot" as 10 °C, nor can multiplication/division be carried out between any two dates directly. However, ratios of differences can be expressed; for example, one difference can be twice another. Interval type variables are sometimes also called "scaled variables", but the formal mathematical term is an affine space (in this case an affine line).

Characteristics: median, percentile & Monotonic increasing (order (<) & totally ordered set.

median, percentile & Monotonic increasing (order (<)) & totally ordered set

qudt:LogarithmicUnit

Logarithmic units are abstract mathematical units that can be used to express any quantities (physical or mathematical) that are defined on a logarithmic scale, that is, as being proportional to the value of a logarithm function. Examples of logarithmic units include common units of information and entropy, such as the bit, and the byte, as well as units of relative signal strength magnitude such as the decibel.

Logarithmic units are abstract mathematical units that can be used to express any quantities (physical or mathematical) that are defined on a logarithmic scale, that is, as being proportional to the value of a logarithm function. Examples of logarithmic units include common units of information and entropy, such as the bit, and the byte, as well as units of relative signal strength magnitude such as the decibel.

qudt:NIST_SP811_Comment

National Institute of Standards and Technology (NIST) Special Publication 811 Comments on some quantities and their units

qudt:NominalScale

A nominal scale differentiates between items or subjects based only on their names or (meta-)categories and other qualitative classifications they belong to; thus dichotomous data involves the construction of classifications as well as the classification of items. Discovery of an exception to a classification can be viewed as progress. Numbers may be used to represent the variables but the numbers do not have numerical value or relationship: for example, a Globally unique identifier. Examples of these classifications include gender, nationality, ethnicity, language, genre, style, biological species, and form. In a university one could also use hall of affiliation as an example.

A nominal scale differentiates between items or subjects based only on their names or (meta-)categories and other qualitative classifications they belong to; thus dichotomous data involves the construction of classifications as well as the classification of items. Discovery of an exception to a classification can be viewed as progress. Numbers may be used to represent the variables but the numbers do not have numerical value or relationship: For example, a Globally unique identifier. Examples of these classifications include gender, nationality, ethnicity, language, genre, style, biological species, and form. In a university one could also use hall of affiliation as an example.

qudt:OrdinalScale

The ordinal type allows for rank order (1st, 2nd, 3rd, etc.) by which data can be sorted, but still does not allow for relative degree of difference between them. Examples include, on one hand, dichotomous data with dichotomous (or dichotomized) values such as: 'sick' vs. 'healthy' when measuring health, 'guilty' vs. 'innocent' when making judgments in courts, 'wrong/false' vs. 'right/true' when measuring truth value, and, on the other hand, non-dichotomous data consisting of a spectrum of values, such as: 'completely agree', 'mostly agree', 'mostly disagree', 'completely disagree' when measuring opinion.

The ordinal type allows for rank order (1st, 2nd, 3rd, etc.) by which data can be sorted, but still does not allow for relative degree of difference between them. Examples include, on one hand, dichotomous data with dichotomous (or dichotomized) values such as 'sick' vs. 'healthy' when measuring health, 'guilty' vs. 'innocent' when making judgments in courts, 'wrong/false' vs. 'right/true' when measuring truth value, and, on the other hand, non-dichotomous data consisting of a spectrum of values, such as 'completely agree', 'mostly agree', 'mostly disagree', 'completely disagree' when measuring opinion.

qudt:Organization

qudt:PhysicalConstant

A Physical constant is a physical quantity that is generally believed to be both universal in nature and constant in time. It can be contrasted with a mathematical constant, which is a fixed numerical value but does not directly involve any physical measurement.

There are many physical constants in science, some of the most widely recognized being: the speed of light in vacuum c, Newton's gravitational constant G, Planck's constant h, the electric permittivity of free space ε0, and the elementary charge e.

Physical constants can take many dimensional forms, or may be dimensionless depending on the system of quantities and units used.

A physical constant is a physical quantity that is generally believed to be both universal in nature and constant in time. It can be contrasted with a mathematical constant, which is a fixed numerical value but does not directly involve any physical measurement. There are many physical constants in science, some of the most widely recognized being the speed of light in vacuum c, Newton's gravitational constant G, Planck's constant h, the electric permittivity of free space ε0, and the elementary charge e. Physical constants can take many dimensional forms, or may be dimensionless depending on the system of quantities and units used.

qudt:PlaneAngleUnit

qudt:Prefix

qudt:Quantifiable

Quantifiable is an aspect class that affords to an entity properties for being measurable, observable, or countable.

Quantifiable ascribes to some thing the capability of being measured, observed, or counted.

qudt:Quantity

A Quantity is the measurement of an observable property of a particular object, event, or physical system. A quantity is always associated with the context of measurement (i.e. the thing measured, the measured value, the accuracy of measurement, etc.) whereas the underlying quantity kind is independent of any particular measurement. Thus, length is a quantity kind while the height of a rocket is a specific quantity of length; its magnitude that may be expressed in meters, feet, inches, etc. Examples of physical quantities include physical constants, such as the speed of light in a vacuum, Planck's constant, the electric permittivity of free space, and the fine structure constant.

In other words, quantities are quantifiable aspects of the world, such as the duration of a movie, the distance between two points, velocity of a car, the pressure of the atmosphere, and a person's weight; and units are used to describe their numerical measure.

Many quantity kinds are related to each other by various physical laws, and as a result, the associated units of some quantity kinds can be expressed as products (or ratios) of powers of other quantity kinds (e.g., momentum is mass times velocity and velocity is defined as distance divided by time). In this way, some quantities can be calculated from other measured quantities using their associations to the quantity kinds in these expressions. These quantity kind relationships are also discussed in dimensional analysis. Those that cannot be so expressed can be regarded as "fundamental" in this sense.

A quantity is distinguished from a "quantity kind" in that the former carries a value and the latter is a type specifier.

A quantity is the measurement of an observable property of a particular object, event, or physical system. A quantity is always associated with the context of measurement (i.e. the thing measured, the measured value, the accuracy of measurement, etc.) whereas the underlying quantity kind is independent of any particular measurement. Thus, length is a quantity kind while the height of a rocket is a specific quantity of length; its magnitude that may be expressed in meters, feet, inches, etc. Examples of physical quantities include physical constants, such as the speed of light in a vacuum, Planck's constant, the electric permittivity of free space, and the fine structure constant.

In other words, quantities are quantifiable aspects of the world, such as the duration of a movie, the distance between two points, velocity of a car, the pressure of the atmosphere, and a person's weight; and units are used to describe their numerical measure.

Many quantity kinds are related to each other by various physical laws, and as a result, the associated units of some quantity kinds can be expressed as products (or ratios) of powers of other quantity kinds (e.g., momentum is mass times velocity and velocity is defined as distance divided by time). In this way, some quantities can be calculated from other measured quantities using their associations to the quantity kinds in these expressions. These quantity kind relationships are also discussed in dimensional analysis. Those that cannot be so expressed can be regarded as "fundamental" in this sense.

A quantity is distinguished from a "quantity kind" in that the former carries a value and the latter is a type specifier.

qudt:QuantityKind

A Quantity Kind is any observable property that can be measured and quantified numerically. Familiar examples include physical properties such as length, mass, time, force, energy, power, electric charge, etc. Less familiar examples include currency, interest rate, price to earning ratio, and information capacity.

A Quantity Kind is any observable property that can be measured and quantified numerically. Familiar examples include physical properties such as length, mass, time, force, energy, power, electric charge, etc. Less familiar examples include currency, interest rate, price to earning ratio, and information capacity.

qudt:QuantityKindDimensionVector

$\text{Quantity Kind Dimension Vector}$ describes the dimensionality of a quantity kind in the context of a system of units. In the SI system of units, the dimensions of a quantity kind are expressed as a product of the basic physical dimensions mass ($M$), length ($L$), time ($T$) current ($I$), amount of substance ($N$), luminous intensity ($J$) and absolute temperature ($\theta$) as $dim \, Q = L^{\alpha} \, M^{\beta} \, T^{\gamma} \, I ^{\delta} \, \theta ^{\epsilon} \, N^{\eta} \, J ^{\nu}$. The rational powers of the dimensional exponents, $\alpha, \, \beta, \, \gamma, \, \delta, \, \epsilon, \, \eta, \, \nu$, are positive, negative, or zero. For example, the dimension of the physical quantity kind $\it{speed}$ is $\boxed{length/time}$, $L/T$ or $LT^{-1}$, and the dimension of the physical quantity kind force is $\boxed{mass \times acceleration}$ or $\boxed{mass \times (length/time)/time}$, $ML/T^2$ or $MLT^{-2}$ respectively.

A Quantity Kind Dimension Vector describes the dimensionality of a quantity kind in the context of a system of units. In the SI system of units, the dimensions of a quantity kind are expressed as a product of the basic physical dimensions mass ($M$), length ($L$), time ($T$) current ($I$), amount of substance ($N$), luminous intensity ($J$) and absolute temperature ($\theta$) as $dim \, Q = L^{\alpha} \, M^{\beta} \, T^{\gamma} \, I ^{\delta} \, \theta ^{\epsilon} \, N^{\eta} \, J ^{\nu}$.

The rational powers of the dimensional exponents, $\alpha, \, \beta, \, \gamma, \, \delta, \, \epsilon, \, \eta, \, \nu$, are positive, negative, or zero.

For example, the dimension of the physical quantity kind $\it{speed}$ is $\boxed{length/time}$, $L/T$ or $LT^{-1}$, and the dimension of the physical quantity kind force is $\boxed{mass \times acceleration}$ or $\boxed{mass \times (length/time)/time}$, $ML/T^2$ or $MLT^{-2}$ respectively.

qudt:QuantityKindDimensionVector_CGS

A CGS Dimension Vector is used to specify the dimensions for a C.G.S. quantity kind.

A CGS Dimension Vector is used to specify the dimensions for a C.G.S. quantity kind.

qudt:QuantityKindDimensionVector_CGS-EMU

A CGS EMU Dimension Vector is used to specify the dimensions for EMU C.G.S. quantity kind.

A CGS EMU Dimension Vector is used to specify the dimensions for EMU C.G.S. quantity kind.

qudt:QuantityKindDimensionVector_CGS-ESU

A CGS ESU Dimension Vector is used to specify the dimensions for ESU C.G.S. quantity kind.

A CGS ESU Dimension Vector is used to specify the dimensions for ESU C.G.S. quantity kind.

qudt:QuantityKindDimensionVector_CGS-GAUSS

A CGS GAUSS Dimension Vector is used to specify the dimensions for Gaussioan C.G.S. quantity kind.

A CGS GAUSS Dimension Vector is used to specify the dimensions for Gaussioan C.G.S. quantity kind.

qudt:QuantityKindDimensionVector_CGS-LH

A CGS LH Dimension Vector is used to specify the dimensions for Lorentz-Heaviside C.G.S. quantity kind.

A CGS LH Dimension Vector is used to specify the dimensions for Lorentz-Heaviside C.G.S. quantity kind.

qudt:QuantityKindDimensionVector_ISO

qudt:QuantityKindDimensionVector_Imperial

qudt:QuantityKindDimensionVector_SI

qudt:QuantityType

A $\textit{Quantity Type}$ is an enumeration of quantity kinds. It specializes $\boxed{dtype:EnumeratedValue}$ by constrinaing $\boxed{dtype:value}$ to instances of $\boxed{qudt:QuantityKind}$.

qudt:QuantityValue

A Quantity Value

A Quantity Value expresses the magnitude and kind of a quantity and is given by the product of a numerical value n and a unit of measure U. The number multiplying the unit is referred to as the numerical value of the quantity expressed in that unit. Refer to NIST SP 811 section 7 for more on quantity values.

qudt:RatioScale

A Ratio Scale possesses a meaningful (unique and non-arbitrary) zero value. Most measurement in the physical sciences and engineering is done on ratio scales. Examples include mass, length, duration, plane angle, energy and electric charge.

In contrast to interval scales, ratios are now meaningful because having a non-arbitrary zero point makes it meaningful to say, for example, that one object has "twice the length" of another (= is "twice as long"). Very informally, many ratio scales can be described as specifying "how much" of something (i.e. an amount or magnitude) or "how many" (a count). The Kelvin temperature scale is a ratio scale because it has a unique, non-arbitrary zero point called absolute zero.

The ratio type takes its name from the fact that measurement is the estimation of the ratio between a magnitude of a continuous quantity and a unit magnitude of the same kind (Michell, 1997, 1999). A ratio scale possesses a meaningful (unique and non-arbitrary) zero value. Most measurement in the physical sciences and engineering is done on ratio scales. Examples include mass, length, duration, plane angle, energy and electric charge. In contrast to interval scales, ratios are now meaningful because having a non-arbitrary zero point makes it meaningful to say, for example, that one object has "twice the length" of another (= is "twice as long"). Very informally, many ratio scales can be described as specifying "how much" of something (i.e. an amount or magnitude) or "how many" (a count). The Kelvin temperature scale is a ratio scale because it has a unique, non-arbitrary zero point called absolute zero.

qudt:Rule

qudt:RuleType

qudt:ScalarDatatype

Scalar data types are those that have a single value. The permissible values are defined over a domain that may be integers, float, character or boolean. Often a scalar data type is referred to as a primitive data type.

qudt:Scale

Scales (also called "scales of measurement" or "levels of measurement") are expressions that typically are based on scale types.

Scales (also called "scales of measurement" or "levels of measurement") are expressions that typically refer to the theory of scale types.

qudt:ScaleType

qudt:SolidAngleUnit

The solid angle subtended by a surface S is defined as the surface area of a unit sphere covered by the surface S's projection onto the sphere. A solid angle is related to the surface of a sphere in the same way an ordinary angle is related to the circumference of a circle. Since the total surface area of the unit sphere is 4*pi, the measure of solid angle will always be between 0 and 4*pi.

qudt:Symbol

qudt:SystemOfQuantityKinds

A System of Quantity Kinds is a set of one or more quantity kinds together with a set of zero or more algebraic equations that define relationships between quantity kinds in the set. In the physical sciences, the equations relating quantity kinds are typically physical laws and definitional relations, and constants of proportionality. Examples include Newton's First Law of Motion, Coulomb's Law, and the definition of velocity as the instantaneous change in position. In almost all cases, the system identifies a subset of base quantity kinds.

The base set is chosen so that all other quantity kinds of interest can be derived from the base quantity kinds and the algebraic equations. If the unit system is explicitly associated with a quantity kind system, then the unit system must define at least one unit for each quantity kind. From a scientific point of view, the division of quantities into base quantities and derived quantities is a matter of convention.

A system of quantity kinds is a set of one or more quantity kinds together with a set of zero or more algebraic equations that define relationships between quantity kinds in the set. In the physical sciences, the equations relating quantity kinds are typically physical laws and definitional relations, and constants of proportionality. Examples include Newton’s First Law of Motion, Coulomb’s Law, and the definition of velocity as the instantaneous change in position. In almost all cases, the system identifies a subset of base quantity kinds. The base set is chosen so that all other quantity kinds of interest can be derived from the base quantity kinds and the algebraic equations. If the unit system is explicitly associated with a quantity kind system, then the unit system must define at least one unit for each quantity kind. From a scientific point of view, the division of quantities into base quantities and derived quantities is a matter of convention.

qudt:SystemOfUnits

A System of Units is a set of units which are chosen as the reference scales for some set of quantity kinds together with the definitions of each unit. Units may be defined by experimental observation or by proportion to another unit not included in the system. If the unit system is explicitly associated with a quantity kind system, then the unit system must define at least one unit for each quantity kind.

A system of units is a set of units which are chosen as the reference scales for some set of quantity kinds together with the definitions of each unit. Units may be defined by experimental observation or by proportion to another unit not included in the system. If the unit system is explicitly associated with a quantity kind system, then the unit system must define at least one unit for each quantity kind.

qudt:TransformType

qudt:Unit

A unit of measure, or unit, is a particular quantity value that has been chosen as a scale for measuring other quantities the same kind (more generally of equivalent dimension). For example, the meter is a quantity of length that has been rigorously defined and standardized by the BIPM (International Board of Weights and Measures). Any measurement of the length can be expressed as a number multiplied by the unit meter. More formally, the value of a physical quantity Q with respect to a unit (U) is expressed as the scalar multiple of a real number (n) and U, as $Q = nU$.

qudt:UserQuantityKind

dcterms:abstract

qudt:abbreviation

An abbreviation for a unit is a short ASCII string that is used in place of the full name for the unit in contexts where non-ASCII characters would be problematic, or where using the abbreviation will enhance readability. When a power of abase unit needs to be expressed, such as squares this can be done using abbreviations rather than symbols. For example, sq ft means square foot, and cu ft means cubic foot.

qudt:acronym

qudt:altSymbol

An alternative symbol

qudt:applicableCGSUnit

qudt:applicableISOUnit

qudt:applicableImperialUnit

qudt:applicablePhysicalConstant

qudt:applicablePlanckUnit

qudt:applicableSIUnit

qudt:applicableSystem

This property relates a unit of measure with a unit system that may or may not define the unit, but within which the unit is compatible.

qudt:applicableUSCustomaryUnit

qudt:applicableUnit

See this page on the QUDT GitHubWiki on how "qudt:applicableUnit" is computed from "qudt:hasQuantityKind" and then materialized.

qudt:baseDimensionEnumeration

This property associates a system of quantities with an enumeration that enumerates the base dimensions of the system in canonical order.

qudt:baseUnitOfSystem

This property relates a unit of measure to the system of units in which it is defined as a base unit for the system. The base units of a system are used to define the derived units of the system by expressing the derived units as products of the base units raised to a rational power.

qudt:belongsToSystemOfQuantities

qudt:blockchainNetwork

Primary network name (e.g., 'Bitcoin Mainnet', 'Ethereum Mainnet').

qudt:categorizedAs

qudt:coherentUnitSystem

A system of units is coherent with respect to a system of quantities and equations if the system of units is chosen in such a way that the equations between numerical values have exactly the same form (including the numerical factors) as the corresponding equations between the quantities. In such a coherent system, no numerical factor other than the number 1 ever occurs in the expressions for the derived units in terms of the base units. For example, the $newton$ and the $joule$. These two are, respectively, the force that causes one kilogram to be accelerated at 1 metre per (1) second per (1) second, and the work done by 1 newton acting over 1 metre. Being coherent refers to this consistent use of 1. In the old c.g.s. system , with its base units the centimetre and the gram, the corresponding coherent units were the dyne and the erg, respectively the force that causes 1 gram to be accelerated at 1 centimetre per (1) second per (1) second, and the work done by 1 dyne acting over 1 centimetre. So $1\,newton = 10^5 dyne$, $1 joule = 10^7 erg$, making each of the four compatible in a decimal sense within its respective other system, but not coherent therein.

qudt:conversionMultiplier

qudt:conversionMultiplierSN

qudt:conversionOffset

qudt:conversionOffsetSN

qudt:currencyCode

Alphabetic Currency Code as defined by ISO 4217. For example, the currency code for the US dollar is USD.

qudt:currencyExponent

The currency exponent indicates the number of decimal places between a major currency unit and its minor currency unit. For example, the US dollar is the major currency unit of the United States, and the US cent is the minor currency unit. Since one cent is 1/100 of a dollar, the US dollar has a currency exponent of 2. However, the Japanese Yen has no minor currency units, so the yen has a currency exponent of 0.

qudt:currencyNumber

Three-digit Currency Code as defined by ISO 4217. For example, the currency number for the US dollar is "840".

qudt:dataStructure

qudt:dbpediaMatch

qudt:default

The default element in an enumeration

qudt:definedUnitOfSystem

This property relates a unit of measure with the unit system that defines the unit.

qudt:denominatorDimensionVector

qudt:deprecated

qudt:derivedCoherentUnitOfSystem

This property relates a unit of measure to the unit system in which the unit is derived from the system's base units with a proportionality constant of one.

qudt:derivedNonCoherentUnitOfSystem

This property relates a unit of measure to the unit system in which the unit is derived from the system's base units without proportionality constant of one.

qudt:derivedUnitOfSystem

This property relates a unit of measure to the system of units in which it is defined as a derived unit. That is, the derived unit is defined as a product of the base units for the system raised to some rational power.

qudt:dimensionExponent

qudt:dimensionExponentForAmountOfSubstance

qudt:dimensionExponentForElectricCurrent

qudt:dimensionExponentForLength

qudt:dimensionExponentForLuminousIntensity

qudt:dimensionExponentForMass

qudt:dimensionExponentForThermodynamicTemperature

qudt:dimensionExponentForTime

qudt:dimensionInverse

qudt:dimensionVectorForSI

qudt:dimensionlessExponent

qudt:element

An element of an enumeration

qudt:exactConstant

qudt:exactMatch

qudt:example

The 'qudt:example' property is used to annotate an instance of a class with a reference to a concept that is an example. The type of this property is 'rdf:Property'. This allows both scalar and object ranges.

The 'qudt:example' property is used to annotate an instance of a class with a reference to a concept that is an example. The type of this property is 'rdf:Property'. This allows both scalar and object ranges.

qudt:exponent

This property relates a factor unit its exponent

qudt:expression

An 'expression' is a finite combination of symbols that are well-formed according to rules that apply to units of measure, quantity kinds and their dimensions.

qudt:factorUnitScalar

For a derived unit that is not exactly the product of its factor units, this property defines the scalar with which that product has to be multiplied with.

qudt:fieldCode

qudt:figure

Provides a link to an image.

qudt:figureCaption

qudt:figureLabel

qudt:guidance

qudt:hasAllowedUnit

This property relates a unit system with a unit of measure that is not defined by or part of the system, but is allowed for use within the system. An allowed unit must be convertible to some dimensionally eqiuvalent unit that is defined by the system.

qudt:hasBaseQuantityKind

qudt:hasBaseUnit

This property relates a system of units to a base unit defined within the system. The base units of a system are used to define the derived units of the system by expressing the derived units as products of the base units raised to a rational power.

qudt:hasCoherentUnit

A coherent unit of measurement for a unit system is a defined unit that may be expressed as a product of powers of the system's base units with the proportionality factor of one.

qudt:hasDTICode

ISO 24165 Digital Token Identifier (12-character alphanumeric).

qudt:hasDefinedUnit

This property relates a unit system with a unit of measure that is defined by the system.

qudt:hasDenominatorPart

qudt:hasDerivedCoherentUnit

qudt:hasDerivedNonCoherentUnit

qudt:hasDerivedUnit

This property relates a system of units to a unit of measure that is defined within the system in terms of the base units for the system. That is, the derived unit is defined as a product of the base units for the system raised to some rational power.

qudt:hasDimension

qudt:hasDimensionExpression

qudt:hasDimensionVector

qudt:hasFactorUnit

This property relates a derived unit to one of its constituent factor units

qudt:hasNumeratorPart

qudt:hasPrefixUnit

qudt:hasQuantity

qudt:hasQuantityKind

qudt:hasReciprocalUnit

Used to relate a unit to its reciprocal unit.

qudt:hasReferenceQuantityKind

qudt:hasRule

qudt:hasUnit

This property relates a factor unit to its unit or system of units with a unit of measure that is either:

a) defined by the system,

b) accepted for use by the system and is convertible to a unit of equivalent dimension that is defined by the system,

c) a reference to the unit of measure of a quantity (variable or constant) of interest.

Systems of units may distinguish between base and derived units. Base units are the units which measure the base quantities for the corresponding system of quantities. The base units are used to define units for all other quantities as products of powers of the base units. Such units are called derived units for the system.

qudt:hasUnitSystem

qudt:hasVocabulary

qudt:height

qudt:id

The "qudt:id" is an identifier string that uniquely identifies a QUDT concept. The identifier is constructed using a prefix. For example, units are coded using the pattern: "UCCCENNNN", where "CCC" is a numeric code or a category and "NNNN" is a digit string for a member element of that category.

For scaled units there may be an addition field that has the format "QNN" where "NN" is a digit string representing an exponent power, and "Q" is a qualifier that indicates with the code "P" that the power is a positive decimal exponent, or the code "N" for a negative decimal exponent, or the code "B" for binary positive exponents.

qudt:iec61360Code

qudt:image

qudt:imageLocation

qudt:informativeReference

Provides a way to reference a source that provided useful but non-normative information.

qudt:isDeltaQuantity

This property is used to identify a Quantity instance that is a measure of a change, or interval, of some property, rather than a measure of its absolute value. This is important for measurements such as temperature differences where the conversion among units would be calculated differently because of offsets.

This property is used to identify a Quantity instance that is a measure of a change, or interval, of some property, rather than a measure of its absolute value. This is important for measurements such as temperature differences where the conversion among units would be calculated differently because of offsets.

qudt:isDimensionInSystem

qudt:isMetricUnit

qudt:isUnitOfSystem

This property relates a unit of measure with a system of units that either a) defines the unit or b) allows the unit to be used within the system.

qudt:isoNormativeReference

Provides a way to reference the ISO unit definition.

qudt:landscape

qudt:latexDefinition

qudt:latexSymbol

The symbol is a glyph that is used to represent some concept, typically a unit or a quantity, in a compact form. For example, the symbol for an Ohm is $ohm$. This contrasts with 'unit:abbreviation', which gives a short alphanumeric abbreviation for the unit, 'ohm' for Ohm.

qudt:mathDefinition

qudt:mathMLdefinition

qudt:normativeReference

Provides a way to reference information that is an authoritative source providing a standard definition

qudt:numeratorDimensionVector

qudt:numericValue

qudt:omUnit

qudt:onlineReference

qudt:order

qudt:outOfScope

qudt:permissibleMaths

qudt:permissibleTransformation

qudt:plainTextDescription

A plain text description is used to provide a description with only simple ASCII characters for cases where LaTeX , HTML or other markup would not be appropriate.

qudt:prefix

Associates a unit with the appropriate prefix, if any.

Associates a unit with the appropriate prefix, if any.

qudt:prefixMultiplier

qudt:prefixMultiplierSN

qudt:qkdvDenominator

qudt:qkdvNumerator

qudt:quantity

a property to relate an observable thing with a quantity (qud:Quantity)

qudt:quantityValue

qudt:rationale

qudt:reference

qudt:referenceUnit

qudt:relativeStandardUncertainty

The relative standard uncertainty of a measurement is the (absolute) standard uncertainty divided by the magnitude of the exact value.

qudt:relevantQuantityKind

qudt:relevantUnit

This property is used for qudt:Discipline instances to identify the Unit instances that are used within a given discipline.

This property is used for qudt:Discipline instances to identify the Unit instances that are used within a given discipline.

qudt:ruleType

qudt:scaleType

qudt:scalingOf

This property relates a unit that is scaled to the base unit that its qudt:conversionMultiplier converts it to

qudt:siExactMatch

qudt:siUnitsExpression

qudt:standardUncertainty

The standard uncertainty of a quantity is the estimated standard deviation of the mean taken from a series of measurements.

qudt:standardUncertaintySN

The standard uncertainty of a quantity is the estimated standard deviation of the mean taken from a series of measurements.

qudt:symbol

The symbol is a glyph that is used to represent some concept, typically a unit or a quantity, in a compact form. For example, the symbol for an Ohm is $ohm$. This contrasts with 'unit:abbreviation', which gives a short alphanumeric abbreviation for the unit, 'ohm' for Ohm.

qudt:systemDefinition

qudt:systemDerivedQuantityKind

qudt:systemDimension

qudt:ucumCode

ucumCode associates a QUDT unit with its UCUM code (case-sensitive).

In SHACL the values are derived from specific ucum properties using 'sh:values'.

qudt:udunitsCode

The UDUNITS package supports units of physical quantities. Its C library provides for arithmetic manipulation of units and for conversion of numeric values between compatible units. The package contains an extensive unit database, which is in XML format and user-extendable. The package also contains a command-line utility for investigating units and converting values.

qudt:uneceCommonCode

The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade.

qudt:unitFor

qudt:url

qudt:value

A property to relate an observable thing with a value expressed as a decimal

qudt:valueQuantity

qudt:valueSN

A property to relate an observable thing with a value expressed in scientific notation

qudt:vectorMagnitude

qudt:width

qudt:wikidataMatch

This property relates a QUDT concept to a Wikidata item. The Wikidata item is identified by the Wikidata URI, which is of the form `https://www.wikidata.org/wiki/Q{number}`.

voag:supersededBy

vaem:GMD_SHACLQUDT-SCHEMA

URI: http://www.linkedmodel.org/schema/vaem#GMD_SHACLQUDT-SCHEMA

The QUDT, or "Quantity, Unit, Dimension and Type" schema defines the base classes properties, and restrictions used for modeling physical quantities, units of measure, and their dimensions in various measurement systems. The goal of the QUDT ontology is to provide a unified model of, measurable quantities, units for measuring different kinds of quantities, the numerical values of quantities in different units of measure and the data structures and data types used to store and manipulate these objects in software.

Except for unit prefixes, all units are specified in separate vocabularies. Descriptions are provided in both HTML and LaTeX formats. A quantity is a measure of an observable phenomenon, that, when associated with something, becomes a property of that thing; a particular object, event, or physical system.

A quantity has meaning in the context of a measurement (i.e. the thing measured, the measured value, the accuracy of measurement, etc.) whereas the underlying quantity kind is independent of any particular measurement. Thus, length is a quantity kind while the height of a rocket is a specific quantity of length; its magnitude that may be expressed in meters, feet, inches, etc. Or, as stated at Wikipedia, in the language of measurement, quantities are quantifiable aspects of the world, such as time, distance, velocity, mass, momentum, energy, and weight, and units are used to describe their measure. Many of these quantities are related to each other by various physical laws, and as a result the units of some of the quantities can be expressed as products (or ratios) of powers of other units (e.g., momentum is mass times velocity and velocity is measured in distance divided by time).

@prefix owl: <http://www.w3.org/2002/07/owl#> .
@prefix rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#> .
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#> .
@prefix xsd: <http://www.w3.org/2001/XMLSchema#> .

<http://www.linkedmodel.org/schema/vaem#GMD_SHACLQUDT-SCHEMA>
  rdf:type <http://www.linkedmodel.org/schema/vaem#GraphMetaData> ;
  <http://purl.org/dc/terms/contributor> "Daniel Mekonnen" ;
  <http://purl.org/dc/terms/contributor> "David Price" ;
  <http://purl.org/dc/terms/contributor> "Jack Hodges" ;
  <http://purl.org/dc/terms/contributor> "James E. Masters" ;
  <http://purl.org/dc/terms/contributor> "Simon J D Cox" ;
  <http://purl.org/dc/terms/contributor> "Steve Ray" ;
  <http://purl.org/dc/terms/created> "2011-04-20"^^xsd:date ;
  <http://purl.org/dc/terms/creator> "Ralph Hodgson" ;
  <http://purl.org/dc/terms/description> """<p>The QUDT, or \"Quantity, Unit, Dimension and Type\" schema defines the base classes properties, and restrictions used for modeling physical quantities, units of measure, and their dimensions in various measurement systems. The goal of the QUDT ontology is to provide a unified model of, measurable quantities, units for measuring different kinds of quantities, the numerical values of quantities in different units of measure and the data structures and data types used to store and manipulate these objects in software.</p>

<p>Except for unit prefixes, all units are specified in separate vocabularies. Descriptions are provided in both HTML and LaTeX formats. A quantity is a measure of an observable phenomenon, that, when associated with something, becomes a property of that thing; a particular object, event, or physical system. </p>

<p>A quantity has meaning in the context of a measurement (i.e. the thing measured, the measured value, the accuracy of measurement, etc.) whereas the underlying quantity kind is independent of any particular measurement. Thus, length is a quantity kind while the height of a rocket is a specific quantity of length; its magnitude that may be expressed in meters, feet, inches, etc.  Or, as stated at Wikipedia, in the language of measurement, quantities are quantifiable aspects of the world, such as time, distance, velocity, mass, momentum, energy, and weight, and units are used to describe their measure. Many of these quantities are related to each other by various physical laws, and as a result the units of some of the quantities can be expressed as products (or ratios) of powers of other units (e.g., momentum is mass times velocity and velocity is measured in distance divided by time).</p>"""^^rdf:HTML ;
  <http://purl.org/dc/terms/modified> "2026-01-15T13:18:54Z"^^xsd:dateTime ;
  <http://purl.org/dc/terms/rights> """
  This product includes all or a portion of the UCUM table, UCUM codes, and UCUM definitions or is derived from it, subject to a license from Regenstrief Institute, Inc. and The UCUM Organization. Your use of the UCUM table, UCUM codes, UCUM definitions also is subject to this license, a copy of which is available at ​http://unitsofmeasure.org. The current complete UCUM table, UCUM Specification are available for download at ​http://unitsofmeasure.org. The UCUM table and UCUM codes are copyright © 1995-2009, Regenstrief Institute, Inc. and the Unified Codes for Units of Measures (UCUM) Organization. All rights reserved.

THE UCUM TABLE (IN ALL FORMATS), UCUM DEFINITIONS, AND SPECIFICATION ARE PROVIDED 'AS IS.' ANY EXPRESS OR IMPLIED WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  """ ;
  <http://purl.org/dc/terms/rights> "The QUDT Ontologies are issued under a Creative Commons Attribution 4.0 International License (CC BY 4.0), available at https://creativecommons.org/licenses/by/4.0/. Attribution should be made to QUDT.org" ;
  <http://purl.org/dc/terms/subject> "QUDT" ;
  <http://purl.org/dc/terms/title> "QUDT SHACL Schema - Version 3.1.10" ;
  <http://qudt.org/schema/qudt/informativeReference> "http://unitsofmeasure.org/trac"^^xsd:anyURI ;
  <http://qudt.org/schema/qudt/informativeReference> "http://www.bipm.org/en/publications/si-brochure"^^xsd:anyURI ;
  <http://qudt.org/schema/qudt/informativeReference> "http://www.bipm.org/utils/common/documents/jcgm/JCGM_200_2008.pdf"^^xsd:anyURI ;
  <http://qudt.org/schema/qudt/informativeReference> "https://books.google.com/books?id=pIlCAAAAIAAJ&dq=dimensional+analysis&hl=en"^^xsd:anyURI ;
  <http://qudt.org/schema/qudt/informativeReference> "https://www.nist.gov/physical-measurement-laboratory/special-publication-811"^^xsd:anyURI ;
  <http://www.linkedmodel.org/schema/vaem#graphName> "qudt" ;
  <http://www.linkedmodel.org/schema/vaem#graphTitle> "Quantities, Units, Dimensions and Types (QUDT) SHACL Schema - Version 3.1.10" ;
  <http://www.linkedmodel.org/schema/vaem#hasGraphRole> <http://www.linkedmodel.org/schema/vaem#SHACLSchemaGraph> ;
  <http://www.linkedmodel.org/schema/vaem#hasOwner> <http://www.linkedmodel.org/schema/vaem#QUDT> ;
  <http://www.linkedmodel.org/schema/vaem#hasSteward> <http://www.linkedmodel.org/schema/vaem#QUDT> ;
  <http://www.linkedmodel.org/schema/vaem#intent> "Specifies the schema for quantities, units and dimensions. Types are defined in other schemas." ;
  <http://www.linkedmodel.org/schema/vaem#isMetadataFor> <http://qudt.org/3.1.10/schema/shacl/qudt> ;
  <http://www.linkedmodel.org/schema/vaem#latestPublishedVersion> "https://qudt.org/doc/2026/01/DOC_SCHEMA-SHACL-QUDT.html"^^xsd:anyURI ;
  <http://www.linkedmodel.org/schema/vaem#logo> "https://qudt.org/linkedmodels.org/assets/lib/lm/images/logos/qudt_logo-300x110.png"^^xsd:anyURI ;
  <http://www.linkedmodel.org/schema/vaem#namespace> "http://qudt.org/schema/qudt/"^^xsd:anyURI ;
  <http://www.linkedmodel.org/schema/vaem#namespacePrefix> "qudt" ;
  <http://www.linkedmodel.org/schema/vaem#owner> "qudt.org" ;
  <http://www.linkedmodel.org/schema/vaem#previousPublishedVersion> "https://qudt.org/doc/2025/12/DOC_SCHEMA-SHACL-QUDT.html"^^xsd:anyURI ;
  <http://www.linkedmodel.org/schema/vaem#turtleFileURL> "http://qudt.org/3.1.10/schema/shacl/qudt"^^xsd:anyURI ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/abstract> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/contributor> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/created> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/description> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/modified> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/rights> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/source> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/subject> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://purl.org/dc/terms/title> ;
  <http://www.linkedmodel.org/schema/vaem#usesNonImportedResource> <http://voag.linkedmodel.org/schema/voag#QUDT-Attribution> ;
  <http://www.linkedmodel.org/schema/vaem#withAttributionTo> <http://voag.linkedmodel.org/schema/voag#QUDT-Attribution> ;
  rdfs:isDefinedBy <http://qudt.org/3.1.10/schema/shacl/qudt> ;
  rdfs:label "QUDT SHACL Schema Metadata Version 3.1.10" ;
  owl:versionIRI <http://qudt.org/3.1.10/schema/shacl/qudt> ;
.

{"resource":"QUDT SHACL Schema Metadata Version 3.1.10" 
 ,"qname":"vaem:GMD_SHACLQUDT-SCHEMA" 
 ,"uri":"http:\/\/www.linkedmodel.org\/schema\/vaem#GMD_SHACLQUDT-SCHEMA" 
 ,"properties":["contributor":"Daniel Mekonnen" 
    ,"contributor":"David Price" 
    ,"contributor":"Jack Hodges" 
    ,"contributor":"James E. Masters" 
    ,"contributor":"Simon J D Cox" 
    ,"contributor":"Steve Ray" 
    ,"created":"2011-04-20" 
    ,"creator":"Ralph Hodgson" 
    ,"description":"<p>The QUDT, or \"Quantity, Unit, Dimension and Type\" schema defines the base classes properties, and restrictions used for modeling physical quantities, units of measure, and their dimensions in various measurement systems. The goal of the QUDT ontology is to provide a unified model of, measurable quantities, units for measuring different kinds of quantities, the numerical values of quantities in different units of measure and the data structures and data types used to store and manipulate these objects in software.<\/p>\n\n<p>Except for unit prefixes, all units are specified in separate vocabularies. Descriptions are provided in both HTML and LaTeX formats. A quantity is a measure of an observable phenomenon, that, when associated with something, becomes a property of that thing; a particular object, event, or physical system. <\/p>\n\n<p>A quantity has meaning in the context of a measurement (i.e. the thing measured, the measured value, the accuracy of measurement, etc.) whereas the underlying quantity kind is independent of any particular measurement. Thus, length is a quantity kind while the height of a rocket is a specific quantity of length; its magnitude that may be expressed in meters, feet, inches, etc.  Or, as stated at Wikipedia, in the language of measurement, quantities are quantifiable aspects of the world, such as time, distance, velocity, mass, momentum, energy, and weight, and units are used to describe their measure. Many of these quantities are related to each other by various physical laws, and as a result the units of some of the quantities can be expressed as products (or ratios) of powers of other units (e.g., momentum is mass times velocity and velocity is measured in distance divided by time).<\/p>" 
    ,"graph name":"qudt" 
    ,"graph title":"Quantities, Units, Dimensions and Types (QUDT) SHACL Schema - Version 3.1.10" 
    ,"has graph role":"vaem:SHACLSchemaGraph" 
    ,"has owner":"vaem:QUDT" 
    ,"has steward":"vaem:QUDT" 
    ,"informative reference":"http:\/\/unitsofmeasure.org\/trac" 
    ,"informative reference":"http:\/\/www.bipm.org\/en\/publications\/si-brochure" 
    ,"informative reference":"http:\/\/www.bipm.org\/utils\/common\/documents\/jcgm\/JCGM_200_2008.pdf" 
    ,"informative reference":"https:\/\/books.google.com\/books?id=pIlCAAAAIAAJ&dq=dimensional+analysis&hl=en" 
    ,"informative reference":"https:\/\/www.nist.gov\/physical-measurement-laboratory\/special-publication-811" 
    ,"intent":"Specifies the schema for quantities, units and dimensions. Types are defined in other schemas." 
    ,"is metadata for":"<http:\/\/qudt.org\/3.1.10\/schema\/shacl\/qudt>" 
    ,"isDefinedBy":"<http:\/\/qudt.org\/3.1.10\/schema\/shacl\/qudt>" 
    ,"label":"QUDT SHACL Schema Metadata Version 3.1.10" 
    ,"latest published version":"https:\/\/qudt.org\/doc\/2026\/01\/DOC_SCHEMA-SHACL-QUDT.html" 
    ,"logo":"https:\/\/qudt.org\/linkedmodels.org\/assets\/lib\/lm\/images\/logos\/qudt_logo-300x110.png" 
    ,"modified":"2026-01-15T13:18:54Z" 
    ,"namespace":"http:\/\/qudt.org\/schema\/qudt\/" 
    ,"namespace prefix":"qudt" 
    ,"owner":"qudt.org" 
    ,"previous published version":"https:\/\/qudt.org\/doc\/2025\/12\/DOC_SCHEMA-SHACL-QUDT.html" 
    ,"rights":"\n  This product includes all or a portion of the UCUM table, UCUM codes, and UCUM definitions or is derived from it, subject to a license from Regenstrief Institute, Inc. and The UCUM Organization. Your use of the UCUM table, UCUM codes, UCUM definitions also is subject to this license, a copy of which is available at \u200Bhttp:\/\/unitsofmeasure.org. The current complete UCUM table, UCUM Specification are available for download at \u200Bhttp:\/\/unitsofmeasure.org. The UCUM table and UCUM codes are copyright © 1995-2009, Regenstrief Institute, Inc. and the Unified Codes for Units of Measures (UCUM) Organization. All rights reserved.\n\nTHE UCUM TABLE (IN ALL FORMATS), UCUM DEFINITIONS, AND SPECIFICATION ARE PROVIDED 'AS IS.' ANY EXPRESS OR IMPLIED WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.\n  " 
    ,"rights":"The QUDT Ontologies are issued under a Creative Commons Attribution 4.0 International License (CC BY 4.0), available at https:\/\/creativecommons.org\/licenses\/by\/4.0\/. Attribution should be made to QUDT.org" 
    ,"subject":"QUDT" 
    ,"title":"QUDT SHACL Schema - Version 3.1.10" 
    ,"turtle file URL":"http:\/\/qudt.org\/3.1.10\/schema\/shacl\/qudt" 
    ,"type":"vaem:GraphMetaData" 
    ,"uses non-imported resource":"dcterms:abstract" 
    ,"uses non-imported resource":"dcterms:contributor" 
    ,"uses non-imported resource":"dcterms:created" 
    ,"uses non-imported resource":"dcterms:description" 
    ,"uses non-imported resource":"dcterms:modified" 
    ,"uses non-imported resource":"dcterms:rights" 
    ,"uses non-imported resource":"dcterms:source" 
    ,"uses non-imported resource":"dcterms:subject" 
    ,"uses non-imported resource":"dcterms:title" 
    ,"uses non-imported resource":"voag:QUDT-Attribution" 
    ,"versionIRI":"<http:\/\/qudt.org\/3.1.10\/schema\/shacl\/qudt>" 
    ,"with attribution to":"voag:QUDT-Attribution" 
    ]}

{
  "@id" : "http://www.linkedmodel.org/schema/vaem#GMD_SHACLQUDT-SCHEMA",
  "@type" : "http://www.linkedmodel.org/schema/vaem#GraphMetaData",
  "contributor" : [ "Daniel Mekonnen", "James E. Masters", "David Price", "Simon J D Cox", "Jack Hodges", "Steve Ray" ],
  "created" : "2011-04-20",
  "creator" : "Ralph Hodgson",
  "description" : "<p>The QUDT, or \"Quantity, Unit, Dimension and Type\" schema defines the base classes properties, and restrictions used for modeling physical quantities, units of measure, and their dimensions in various measurement systems. The goal of the QUDT ontology is to provide a unified model of, measurable quantities, units for measuring different kinds of quantities, the numerical values of quantities in different units of measure and the data structures and data types used to store and manipulate these objects in software.</p>\n\n<p>Except for unit prefixes, all units are specified in separate vocabularies. Descriptions are provided in both HTML and LaTeX formats. A quantity is a measure of an observable phenomenon, that, when associated with something, becomes a property of that thing; a particular object, event, or physical system. </p>\n\n<p>A quantity has meaning in the context of a measurement (i.e. the thing measured, the measured value, the accuracy of measurement, etc.) whereas the underlying quantity kind is independent of any particular measurement. Thus, length is a quantity kind while the height of a rocket is a specific quantity of length; its magnitude that may be expressed in meters, feet, inches, etc.  Or, as stated at Wikipedia, in the language of measurement, quantities are quantifiable aspects of the world, such as time, distance, velocity, mass, momentum, energy, and weight, and units are used to describe their measure. Many of these quantities are related to each other by various physical laws, and as a result the units of some of the quantities can be expressed as products (or ratios) of powers of other units (e.g., momentum is mass times velocity and velocity is measured in distance divided by time).</p>",
  "modified" : "2026-01-15T13:18:54Z",
  "rights" : [ "The QUDT Ontologies are issued under a Creative Commons Attribution 4.0 International License (CC BY 4.0), available at https://creativecommons.org/licenses/by/4.0/. Attribution should be made to QUDT.org", "\n  This product includes all or a portion of the UCUM table, UCUM codes, and UCUM definitions or is derived from it, subject to a license from Regenstrief Institute, Inc. and The UCUM Organization. Your use of the UCUM table, UCUM codes, UCUM definitions also is subject to this license, a copy of which is available at ​http://unitsofmeasure.org. The current complete UCUM table, UCUM Specification are available for download at ​http://unitsofmeasure.org. The UCUM table and UCUM codes are copyright © 1995-2009, Regenstrief Institute, Inc. and the Unified Codes for Units of Measures (UCUM) Organization. All rights reserved.\n\nTHE UCUM TABLE (IN ALL FORMATS), UCUM DEFINITIONS, AND SPECIFICATION ARE PROVIDED 'AS IS.' ANY EXPRESS OR IMPLIED WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.\n  " ],
  "subject" : "QUDT",
  "title" : "QUDT SHACL Schema - Version 3.1.10",
  "informativeReference" : [ "https://books.google.com/books?id=pIlCAAAAIAAJ&dq=dimensional+analysis&hl=en", "http://unitsofmeasure.org/trac", "https://www.nist.gov/physical-measurement-laboratory/special-publication-811", "http://www.bipm.org/en/publications/si-brochure", "http://www.bipm.org/utils/common/documents/jcgm/JCGM_200_2008.pdf" ],
  "graphName" : "qudt",
  "graphTitle" : "Quantities, Units, Dimensions and Types (QUDT) SHACL Schema - Version 3.1.10",
  "hasGraphRole" : "http://www.linkedmodel.org/schema/vaem#SHACLSchemaGraph",
  "hasOwner" : "http://www.linkedmodel.org/schema/vaem#QUDT",
  "hasSteward" : "http://www.linkedmodel.org/schema/vaem#QUDT",
  "intent" : "Specifies the schema for quantities, units and dimensions. Types are defined in other schemas.",
  "isMetadataFor" : "http://qudt.org/3.1.10/schema/shacl/qudt",
  "latestPublishedVersion" : "https://qudt.org/doc/2026/01/DOC_SCHEMA-SHACL-QUDT.html",
  "logo" : "https://qudt.org/linkedmodels.org/assets/lib/lm/images/logos/qudt_logo-300x110.png",
  "namespace" : "http://qudt.org/schema/qudt/",
  "namespacePrefix" : "qudt",
  "owner" : "qudt.org",
  "previousPublishedVersion" : "https://qudt.org/doc/2025/12/DOC_SCHEMA-SHACL-QUDT.html",
  "turtleFileURL" : "http://qudt.org/3.1.10/schema/shacl/qudt",
  "usesNonImportedResource" : [ "http://purl.org/dc/terms/modified", "http://purl.org/dc/terms/description", "http://purl.org/dc/terms/subject", "http://purl.org/dc/terms/rights", "http://purl.org/dc/terms/source", "http://voag.linkedmodel.org/schema/voag#QUDT-Attribution", "http://purl.org/dc/terms/title", "http://purl.org/dc/terms/contributor", "http://purl.org/dc/terms/abstract", "http://purl.org/dc/terms/created" ],
  "withAttributionTo" : "http://voag.linkedmodel.org/schema/voag#QUDT-Attribution",
  "isDefinedBy" : "http://qudt.org/3.1.10/schema/shacl/qudt",
  "label" : "QUDT SHACL Schema Metadata Version 3.1.10",
  "versionIRI" : "http://qudt.org/3.1.10/schema/shacl/qudt",
  "@context" : {
    "label" : {
      "@id" : "http://www.w3.org/2000/01/rdf-schema#label"
    },
    "hasSteward" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#hasSteward",
      "@type" : "@id"
    },
    "rights" : {
      "@id" : "http://purl.org/dc/terms/rights"
    },
    "isDefinedBy" : {
      "@id" : "http://www.w3.org/2000/01/rdf-schema#isDefinedBy",
      "@type" : "@id"
    },
    "turtleFileURL" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#turtleFileURL",
      "@type" : "http://www.w3.org/2001/XMLSchema#anyURI"
    },
    "contributor" : {
      "@id" : "http://purl.org/dc/terms/contributor"
    },
    "created" : {
      "@id" : "http://purl.org/dc/terms/created",
      "@type" : "http://www.w3.org/2001/XMLSchema#date"
    },
    "namespacePrefix" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#namespacePrefix"
    },
    "versionIRI" : {
      "@id" : "http://www.w3.org/2002/07/owl#versionIRI",
      "@type" : "@id"
    },
    "hasOwner" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#hasOwner",
      "@type" : "@id"
    },
    "usesNonImportedResource" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#usesNonImportedResource",
      "@type" : "@id"
    },
    "previousPublishedVersion" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#previousPublishedVersion",
      "@type" : "http://www.w3.org/2001/XMLSchema#anyURI"
    },
    "withAttributionTo" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#withAttributionTo",
      "@type" : "@id"
    },
    "intent" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#intent"
    },
    "hasGraphRole" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#hasGraphRole",
      "@type" : "@id"
    },
    "namespace" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#namespace",
      "@type" : "http://www.w3.org/2001/XMLSchema#anyURI"
    },
    "graphTitle" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#graphTitle"
    },
    "informativeReference" : {
      "@id" : "http://qudt.org/schema/qudt/informativeReference",
      "@type" : "http://www.w3.org/2001/XMLSchema#anyURI"
    },
    "logo" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#logo",
      "@type" : "http://www.w3.org/2001/XMLSchema#anyURI"
    },
    "modified" : {
      "@id" : "http://purl.org/dc/terms/modified",
      "@type" : "http://www.w3.org/2001/XMLSchema#dateTime"
    },
    "graphName" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#graphName"
    },
    "title" : {
      "@id" : "http://purl.org/dc/terms/title"
    },
    "subject" : {
      "@id" : "http://purl.org/dc/terms/subject"
    },
    "latestPublishedVersion" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#latestPublishedVersion",
      "@type" : "http://www.w3.org/2001/XMLSchema#anyURI"
    },
    "description" : {
      "@id" : "http://purl.org/dc/terms/description",
      "@type" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#HTML"
    },
    "creator" : {
      "@id" : "http://purl.org/dc/terms/creator"
    },
    "isMetadataFor" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#isMetadataFor",
      "@type" : "@id"
    },
    "owner" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#owner"
    },
    "rdf" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#",
    "owl" : "http://www.w3.org/2002/07/owl#",
    "xsd" : "http://www.w3.org/2001/XMLSchema#",
    "rdfs" : "http://www.w3.org/2000/01/rdf-schema#"
  }
}

vaem:QUDT

URI: http://www.linkedmodel.org/schema/vaem#QUDT

QUDT is a non-profit organization that governs the QUDT ontologies.

@prefix owl: <http://www.w3.org/2002/07/owl#> .
@prefix rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#> .
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#> .
@prefix xsd: <http://www.w3.org/2001/XMLSchema#> .

<http://www.linkedmodel.org/schema/vaem#QUDT>
  rdf:type <http://www.linkedmodel.org/schema/vaem#Party> ;
  <http://purl.org/dc/terms/description> "QUDT is a non-profit organization that governs the QUDT ontologies."^^rdf:HTML ;
  <http://www.linkedmodel.org/schema/vaem#graphName> "qudt.org" ;
  <http://www.linkedmodel.org/schema/vaem#website> "http://www.qudt.org"^^xsd:anyURI ;
  rdfs:isDefinedBy <http://qudt.org/3.1.10/schema/qudt> ;
  rdfs:isDefinedBy <http://qudt.org/3.1.10/schema/shacl/qudt> ;
  rdfs:label "QUDT" ;
.

{"resource":"QUDT" 
 ,"qname":"vaem:QUDT" 
 ,"uri":"http:\/\/www.linkedmodel.org\/schema\/vaem#QUDT" 
 ,"properties":["description":"QUDT is a non-profit organization that governs the QUDT ontologies." 
    ,"graph name":"qudt.org" 
    ,"isDefinedBy":"<http:\/\/qudt.org\/3.1.10\/schema\/qudt>" 
    ,"isDefinedBy":"<http:\/\/qudt.org\/3.1.10\/schema\/shacl\/qudt>" 
    ,"label":"QUDT" 
    ,"type":"vaem:Party" 
    ,"website":"http:\/\/www.qudt.org" 
    ]}

{
  "@id" : "http://www.linkedmodel.org/schema/vaem#QUDT",
  "@type" : "http://www.linkedmodel.org/schema/vaem#Party",
  "description" : "QUDT is a non-profit organization that governs the QUDT ontologies.",
  "graphName" : "qudt.org",
  "website" : "http://www.qudt.org",
  "isDefinedBy" : [ "http://qudt.org/3.1.10/schema/qudt", "http://qudt.org/3.1.10/schema/shacl/qudt" ],
  "label" : "QUDT",
  "@context" : {
    "isDefinedBy" : {
      "@id" : "http://www.w3.org/2000/01/rdf-schema#isDefinedBy",
      "@type" : "@id"
    },
    "description" : {
      "@id" : "http://purl.org/dc/terms/description",
      "@type" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#HTML"
    },
    "label" : {
      "@id" : "http://www.w3.org/2000/01/rdf-schema#label"
    },
    "graphName" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#graphName"
    },
    "website" : {
      "@id" : "http://www.linkedmodel.org/schema/vaem#website",
      "@type" : "http://www.w3.org/2001/XMLSchema#anyURI"
    },
    "rdf" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#",
    "owl" : "http://www.w3.org/2002/07/owl#",
    "xsd" : "http://www.w3.org/2001/XMLSchema#",
    "rdfs" : "http://www.w3.org/2000/01/rdf-schema#"
  }
}

qudt:LatexString

A type of string in which some characters may be wrapped with '$' and '$ characters for LaTeX rendering.

A type of string in which some characters may be wrapped with '$' and '$ characters for LaTeX rendering.

qudt:UCUMcs

Lexical pattern for the case-sensitive version of UCUM code

Lexical pattern for the case-sensitive version of UCUM code