quantitykind:Reflectivity

URI: http://qudt.org/vocab/quantitykind/Reflectivity

Type
Description

For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field; as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.

For layered and finite media, according to the CIE, reflectivity is distinguished from reflectance by the fact that reflectivity is a value that applies to thick reflecting objects. When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.

Properties
qudt:applicableUnit
qudt:plainTextDescription
For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field; as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number. For layered and finite media, according to the CIE, reflectivity is distinguished from reflectance by the fact that reflectivity is a value that applies to thick reflecting objects. When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.
skos:broader
qudt:hasDimensionVector
qudt:latexSymbol
$\rho$
rdf:type
Annotations
rdfs:comment
Applicable units are those of quantitykind:Reflectance
dcterms:description

For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field; as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.

For layered and finite media, according to the CIE, reflectivity is distinguished from reflectance by the fact that reflectivity is a value that applies to thick reflecting objects. When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.

qudt:informativeReference
rdfs:isDefinedBy
rdfs:label
Reflectivity(en)
View as:  CSV

Work in progress

RDF/XML 
<rdf:RDF
    xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
    xmlns:j.0="http://qudt.org/schema/qudt/"
    xmlns:j.1="http://purl.org/dc/terms/"
    xmlns:owl="http://www.w3.org/2002/07/owl#"
    xmlns:j.2="http://www.w3.org/2004/02/skos/core#"
    xmlns:rdfs="http://www.w3.org/2000/01/rdf-schema#"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema#" > 
  <rdf:Description rdf:about="http://qudt.org/vocab/quantitykind/Reflectivity">
    <rdfs:label xml:lang="en">Reflectivity</rdfs:label>
    <j.0:informativeReference rdf:datatype="http://www.w3.org/2001/XMLSchema#anyURI">http://en.wikipedia.org/wiki/Reflectivity</j.0:informativeReference>
    <j.0:applicableUnit rdf:resource="http://qudt.org/vocab/unit/UNITLESS"/>
    <rdfs:comment>Applicable units are those of quantitykind:Reflectance</rdfs:comment>
    <j.0:hasDimensionVector rdf:resource="http://qudt.org/vocab/dimensionvector/A0E0L0I0M0H0T0D1"/>
    <rdfs:isDefinedBy rdf:resource="http://qudt.org/2.1/vocab/quantitykind"/>
    <j.1:description rdf:datatype="http://www.w3.org/1999/02/22-rdf-syntax-ns#HTML">&lt;p&gt;For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field;&amp;nbsp;as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.&lt;/p&gt;

&lt;p&gt;For layered and finite media, according to the CIE,&amp;nbsp;&lt;em&gt;reflectivity&lt;/em&gt; is distinguished from &lt;em&gt;reflectance&lt;/em&gt; by the fact that reflectivity is a value that applies to &lt;em&gt;thick&lt;/em&gt; reflecting objects.&lt;span style="font-size:10.8333px"&gt; &lt;/span&gt;When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.&lt;/p&gt;</j.1:description>
    <j.0:latexSymbol rdf:datatype="http://qudt.org/schema/qudt/LatexString">$\rho$</j.0:latexSymbol>
    <j.0:plainTextDescription>For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field; as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.

For layered and finite media, according to the CIE, reflectivity is distinguished from reflectance by the fact that reflectivity is a value that applies to thick reflecting objects. When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.</j.0:plainTextDescription>
    <j.0:applicableUnit rdf:resource="http://qudt.org/vocab/unit/FRACTION"/>
    <rdf:type rdf:resource="http://qudt.org/schema/qudt/QuantityKind"/>
    <j.2:broader rdf:resource="http://qudt.org/vocab/quantitykind/Reflectance"/>
    <j.0:applicableUnit rdf:resource="http://qudt.org/vocab/unit/PERCENT"/>
  </rdf:Description>
</rdf:RDF>
TURTLE 
@prefix owl: <http://www.w3.org/2002/07/owl#> .
@prefix rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#> .
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#> .
@prefix xsd: <http://www.w3.org/2001/XMLSchema#> .

<http://qudt.org/vocab/quantitykind/Reflectivity>
  rdf:type <http://qudt.org/schema/qudt/QuantityKind> ;
  <http://purl.org/dc/terms/description> """<p>For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field;&nbsp;as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.</p>

<p>For layered and finite media, according to the CIE,&nbsp;<em>reflectivity</em> is distinguished from <em>reflectance</em> by the fact that reflectivity is a value that applies to <em>thick</em> reflecting objects.<span style=\"font-size:10.8333px\"> </span>When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.</p>"""^^rdf:HTML ;
  <http://qudt.org/schema/qudt/applicableUnit> <http://qudt.org/vocab/unit/FRACTION> ;
  <http://qudt.org/schema/qudt/applicableUnit> <http://qudt.org/vocab/unit/PERCENT> ;
  <http://qudt.org/schema/qudt/applicableUnit> <http://qudt.org/vocab/unit/UNITLESS> ;
  <http://qudt.org/schema/qudt/hasDimensionVector> <http://qudt.org/vocab/dimensionvector/A0E0L0I0M0H0T0D1> ;
  <http://qudt.org/schema/qudt/informativeReference> "http://en.wikipedia.org/wiki/Reflectivity"^^xsd:anyURI ;
  <http://qudt.org/schema/qudt/latexSymbol> "$\\rho$"^^<http://qudt.org/schema/qudt/LatexString> ;
  <http://qudt.org/schema/qudt/plainTextDescription> """For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field; as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.

For layered and finite media, according to the CIE, reflectivity is distinguished from reflectance by the fact that reflectivity is a value that applies to thick reflecting objects. When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.""" ;
  rdfs:comment "Applicable units are those of quantitykind:Reflectance" ;
  rdfs:isDefinedBy <http://qudt.org/2.1/vocab/quantitykind> ;
  rdfs:label "Reflectivity"@en ;
  <http://www.w3.org/2004/02/skos/core#broader> <http://qudt.org/vocab/quantitykind/Reflectance> ;
.
JSON 
{"resource":"Reflectivity" 
 ,"qname":"quantitykind:Reflectivity" 
 ,"uri":"http:\/\/qudt.org\/vocab\/quantitykind\/Reflectivity" 
 ,"properties":["applicable unit":"unit:FRACTION" 
    ,"applicable unit":"unit:PERCENT" 
    ,"applicable unit":"unit:UNITLESS" 
    ,"comment":"Applicable units are those of quantitykind:Reflectance" 
    ,"description":"&lt;p&gt;For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field;&amp;nbsp;as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.&lt;\/p&gt;\n\n&lt;p&gt;For layered and finite media, according to the CIE,&amp;nbsp;&lt;em&gt;reflectivity&lt;\/em&gt; is distinguished from &lt;em&gt;reflectance&lt;\/em&gt; by the fact that reflectivity is a value that applies to &lt;em&gt;thick&lt;\/em&gt; reflecting objects.&lt;span style=\"font-size:10.8333px\"&gt; &lt;\/span&gt;When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.&lt;\/p&gt;" 
    ,"description (plain text)":"For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field;&nbsp;as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.\n\nFor layered and finite media, according to the CIE,&nbsp;reflectivity is distinguished from reflectance by the fact that reflectivity is a value that applies to thick reflecting objects. When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space." 
    ,"has broader":"quantitykind:Reflectance" 
    ,"has dimension vector":"dimension:A0E0L0I0M0H0T0D1" 
    ,"informative reference":"http:\/\/en.wikipedia.org\/wiki\/Reflectivity" 
    ,"isDefinedBy":"&lt;http:\/\/qudt.org\/2.1\/vocab\/quantitykind&gt;" 
    ,"label":"Reflectivity" 
    ,"latex symbol":"$\\rho$" 
    ,"type":"qudt:QuantityKind" 
    ]}
JSON-LD 
{
  "@id" : "http://qudt.org/vocab/quantitykind/Reflectivity",
  "@type" : "http://qudt.org/schema/qudt/QuantityKind",
  "description" : "<p>For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field;&nbsp;as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.</p>\n\n<p>For layered and finite media, according to the CIE,&nbsp;<em>reflectivity</em> is distinguished from <em>reflectance</em> by the fact that reflectivity is a value that applies to <em>thick</em> reflecting objects.<span style=\"font-size:10.8333px\"> </span>When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.</p>",
  "applicableUnit" : [ "http://qudt.org/vocab/unit/UNITLESS", "http://qudt.org/vocab/unit/FRACTION", "http://qudt.org/vocab/unit/PERCENT" ],
  "hasDimensionVector" : "http://qudt.org/vocab/dimensionvector/A0E0L0I0M0H0T0D1",
  "informativeReference" : "http://en.wikipedia.org/wiki/Reflectivity",
  "latexSymbol" : "$\\rho$",
  "plainTextDescription" : "For homogeneous and semi-infinite materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient, which is the ratio of the reflected to incident electric field; as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.\n\nFor layered and finite media, according to the CIE, reflectivity is distinguished from reflectance by the fact that reflectivity is a value that applies to thick reflecting objects. When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.",
  "comment" : "Applicable units are those of quantitykind:Reflectance",
  "isDefinedBy" : "http://qudt.org/2.1/vocab/quantitykind",
  "label" : {
    "@language" : "en",
    "@value" : "Reflectivity"
  },
  "broader" : "http://qudt.org/vocab/quantitykind/Reflectance",
  "@context" : {
    "label" : {
      "@id" : "http://www.w3.org/2000/01/rdf-schema#label"
    },
    "informativeReference" : {
      "@id" : "http://qudt.org/schema/qudt/informativeReference",
      "@type" : "http://www.w3.org/2001/XMLSchema#anyURI"
    },
    "applicableUnit" : {
      "@id" : "http://qudt.org/schema/qudt/applicableUnit",
      "@type" : "@id"
    },
    "comment" : {
      "@id" : "http://www.w3.org/2000/01/rdf-schema#comment"
    },
    "hasDimensionVector" : {
      "@id" : "http://qudt.org/schema/qudt/hasDimensionVector",
      "@type" : "@id"
    },
    "isDefinedBy" : {
      "@id" : "http://www.w3.org/2000/01/rdf-schema#isDefinedBy",
      "@type" : "@id"
    },
    "description" : {
      "@id" : "http://purl.org/dc/terms/description",
      "@type" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#HTML"
    },
    "latexSymbol" : {
      "@id" : "http://qudt.org/schema/qudt/latexSymbol",
      "@type" : "http://qudt.org/schema/qudt/LatexString"
    },
    "plainTextDescription" : {
      "@id" : "http://qudt.org/schema/qudt/plainTextDescription"
    },
    "broader" : {
      "@id" : "http://www.w3.org/2004/02/skos/core#broader",
      "@type" : "@id"
    },
    "rdf" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#",
    "owl" : "http://www.w3.org/2002/07/owl#",
    "xsd" : "http://www.w3.org/2001/XMLSchema#",
    "rdfs" : "http://www.w3.org/2000/01/rdf-schema#"
  }
}
Generated 2024-11-15T17:22:04.469-05:00 by lmdoc version 1.1 with  TopBraid SPARQL Web Pages (SWP)